Breaking and entering a house is an age-old act of theft.
If you think about it, no burglar or criminal will go straight to your doors because they know too that there’re sensors in your main access points. As such, even if you have a working system in your home, it’s very likely that you’re still vulnerable.
According to NorthStarHome.com, door and window sensors are often in the proximity of access points, making them always look obvious. Good thing, there are Glass Break Detectors that can spot illegal entry with just the breaking of glass.
Below are helpful things to know about Glass Break Sensors:
The “Thud” Factor in Every Glass Break Sensors
All glass are made not of water, but insanely heated sand. With this, when a glass breaks — it produces cracks and not waves.
Glass break detectors work by identifying the chipping and chinking sounds produced by your windows. This isn’t limited to when the window breaks open. One of the unique capabilities of this sensor is its ability to detect even the littlest thumping and thudding in your window.
So, when an intruder is currently in the process of sizing and scaling your windows, the sensor already triggers the alarm: thus, preventing the break-in before it takes place.
Glass Break Detector Types
There are different categories of glass break technology that become more advantageous in a case to case basis. In general, glass break detectors have three primary arms:
- Active Type – These sensors send out a unique frequency to all the glass materials inside your home. When a breakage occurs, it triggers the alarm via reflecting the cracking or breaking sound.
- Physical Type – When a force hits the glass, the vibration produced acts as a trigger to the alarm.
- Acoustic Type – By combining both the technology of the active and physical types, acoustic glass sensors detect a wider range of glass-related disturbances.
An Effective Invisible Security
In addition to the innovative technologies of glass break detectors, they also have the ability to hide from plain sight. They don’t require proximity to work. By filtering frequencies in the air, you can place it as far enough so burglars can’t turn them off.
A complete home security set up should be as dynamic and proactive as possible. When traditional sensors fail, high-tech ones like Glass Break Detectors can finish the job for you.